Forklift Training Course St Catharines

Forklift Training Course St Catharines - Industry and federal regulators have established the criteria for forklift safety training based on their existing regulations and standards. Those wanting to use a forklift must complete a forklift training course prior to working with one of these machines. The accredited Forklift Operator Training Program is meant to provide people training with the practical skills and knowledge to become an operator of a forklift.

There are forklift operation safety regulations that must be followed pertaining to pre-shift checks, and regulations for lifting and loading.

An inspection checklist should be carried out and submitted to the supervising authority prior to starting a shift. When a maintenance issue is uncovered, the utilization of the specific machine must be stopped until the issue has been addressed. To be able to indicate the machine is out of order, the keys must be removed from the ignition and a warning tag placed in a visible spot.

Safety regulations for loading will consist of checking the load rating capacity on the forklift to determine how much the equipment could handle. When starting the machine, the forks must be in the down position. Remember that there is a loss of about 100 pounds carrying capacity for every inch further away from the carriage which the load is carried.

To safely lift a palletized load, drive the forklift toward the pallet and halt with the fork three inches from the load. Level the mast until it is at right angles to the load. Raise the forks to an inch underneath the slot on the pallet and drive forward. After that lift forks four inches. Tilt back the load to secure it for moving. Drive the lift backwards if the load obscures frontal vision. Check behind and honk in order to alert other workers. Never allow forks to drag on the ground.

The load should be loaded by the forklift in such a way that ensures the load is secure and will not create a hazard to other objects or people. Restraining loads is necessary for materials which can shift during transport and destabilize the forklift.

Drums can be strapped together to prevent movement and shifting of the drums. Operators of forklifts must drive slowly when transporting liquids, to lessen instability in the forklift.

Click to Download the pdf