Forklift Training Schools St Catharines

Forklift Training Schools St Catharines - Forklift Training Schools - For The Safety Of Your Employees

If you are searching for a job as a forklift operator, our regulatory-compliant forklift training Schools provide exceptional instruction in many types and styles of forklifts, lessons on pre-shift check, fuel types and handling of fuels, and safe utilization of a lift truck. Practical, hands-on training helps those participating in obtaining basic operational skills. Course content includes current regulations governing the use of forklifts. Our proven forklift Schools are meant to provide training on these types of trucks: narrow isle forklift, counterbalanced forklift and powered pallet truck.

Do not raise or lower the fork whilst the lift truck is traveling. A load must not extend over the backrest because of the risk of the load sliding back toward the operator. Inspect for overhead obstacles and make certain there is sufficient clearance before raising a load. Stay away from overhead power lines. When the load is raised straight up, tilt it slightly back.

The lift truck is less steady when a load is in a raised position. Make certain that no body ever walks underneath the elevated fork. The operator should not leave the forklift when the load is lifted.

While handling pallets, forks should be level and high enough to go into the pallet and extend all the way below the load. The width of the forks must provide even distribution of weight.

Prior to loading or unloading the truck, chock the wheels and set the brakes. Floors must be strong enough to support the weight of the load and the forklift combined. Fixed jacks can be installed to support a semi-trailer that is not attached to a tractor. The height of the entrance door should clear the forklift height by at least 5 cm. Mark edges of rail cars, ramps or docks and avoid them.

Click to Download the pdf